Nupela tingting EM series ful lektrik masin i adoptim hai injeksen spit hariap bekim na gutpela span laip. Wantaim liklik modular disain, em i givim planti kain injeksen yunit long kamap nambawan rot bilong ol gutpela prodak.
Ol spesifikesen
| PARAMETA | YUNIT | HMD EM100 | ||||||||
| YUNIT BILONG INJEKSEN | C120h | C160h | C210h | |||||||
| Volium bilong sut (tingting) | cm3 | 46 | 64 | 74 | 64 | 74 | 96 | 86 | 113 | 142 |
| Hevi bilong sut (PS) | g | 41 | 58 | 67 | 58 | 67 | 88 | 78 | 102 | 130 |
| oz | 1.45 | 2.05 | 2.36 | 2.05 | 2.36 | 3.1 | 2.75 | 3.6 | 4.59 | |
| Spit bilong injeksen | mm/s | 350 | ||||||||
| Injeksen reit (PS) | g/s | 121 | 169 | 256 | 169 | 196 | 256 | 196 | 256 | 324 |
| Diamita bilong skru | mm | 22 | 26 | 28 | 26 | 28 | 32 | 28 | 32 | 36 |
| Presa bilong sut | MPa | 281 | 201 | 173 | 247 | 213 | 163 | 276 | 211 | 167 |
| Holim strong | MPa | 210 | 151 | 130 | 185 | 160 | 122 | 207 | 158 | 125 |
| Skru L/D resio | -- | 23.6 | 20 | 18.6 | 21.5 | 20 | 18.7 | 23.4 | 20.5 | 18.2 |
| Skru strok | mm | 120 | 120 | 140 | ||||||
| Skru spit (no gat step) | r/min | 400 | ||||||||
| KLEMPING YUNIT | ||||||||||
| Strong bilong pasim | kN | 1000 | ||||||||
| Strok bilong opim mol | mm | 360 | ||||||||
| Sais bilong plet | mm×mm | 625×625 | ||||||||
| Namel long ol 'tie bar' (H×V) | mm×mm | 420×420 | ||||||||
| Maks.delait | mm | 760 | ||||||||
| Mold thickness(Min-Max) | mm | 150-400 | ||||||||
| Ejekta strok | mm | 100 | ||||||||
| Ejector tonnage | kN | 20 | ||||||||
| PAWA YUNIT | ||||||||||
| Koneksen pawa | kW | 28 | 30 | 29.2 | ||||||
| Sais bilong masin (L×W×H) | m | 5.0×1.4×2.0 | 5.0×1.4×2.0 | 5.0×1.4×2.0 | ||||||
| Hevi bilong masin | Ton | 4.3 | 4.3 | 4.5 | ||||||
| Namba bilong ol temp kontrol zon | -- | 4 | 4 | 4 | ||||||
Yunit bilong Klem
Nupela disain 'clamping unit' wantaim bikpela 'rigidity structure' i helpim long mekim wok i stap gut na i wok gut na tu i daunim ol hevi bilong 'contraction', olsem na em i save wokim ol gutpela prodak.
Klostu kain 'lubrication system' i save givim stretpela na gutpela oil mentenens na i gat klia envairomen.
Injeksen Yunit
Ol i ken givim kain kain injeksen yunit wantaim modular disain bihainim ol samting bilong ol prodak we ol i wokim long 'mold'.
Hai spit pefomens long injeksen spit 0~300MM/S na bekim 40ms, em i stret long planti ol stretpela na liklik -wol prodak.
Kontrol sistem
Hai pefomens kontrola we i wok wantaim EATH- ERCAT can-bus sistem i save givim hai efisiens anti-jam- ming pefomens na hai spit intanel kalkulesen long garanti long ril-taim balk data trensfe na stretpela kontrol.
Multi-Functional Man-Machine Friendly
Pawa Kontrol Sistem
Ful lektrik masin we i gat klos bilong 'sync servo motor' i mekim gutpela wok na inap long mekim wok.
Dispela nem i stap long modular komon-DC-bus bilong strongim masin kapasiti na yusa konve- gutpela na praktikel. Multi-komyunikesen protokol i gat sapot long kamapim gutpela na strongpela kontrol.
Hot Tag: ful lektrik injeksen molding masin, Saina ful lektrik injeksen molding masin manifakta, saplaia, faktori
