Turntable kontrol long servo motor. Injeksen yunit wantaim wanpela silinda straksa na gaid linear. Injeksen yunit freim wantaim spes i ken putim liklik yunit o sotpela skru.
Modular disain, injeksen yunit i ken senisim. Gutpela kontrol sistem i gutpela tru long bekim na stretpela wok.
OL SPESIFIKESEN
| PARAMETA | YUNIT | HMDP160 | |||
| intenesenel sais reiting | -- | 300 | 300 | ||
| YUNIT BILONG INJEKSEN | A | B | A | B | |
| Volium bilong sut (tingting) | cm3 | 93 | 108 | 124 | 141 |
| Hevi bilong sut (PS) | g | 85 | 98 | 113 | 128 |
| oz | 3 | 3.5 | 4 | 4.5 | |
| Mak bilong sut | g/s | 55 | 63 | 73 | 83 |
| Diamita bilong skru | mm | 26 | 28 | 30 | 32 |
| Presa bilong sut | MPa | 342 | 295 | 257 | 226 |
| Skru L/D resio | -- | 23 | 21.4 | 22.6 | 21.2 |
| Skru strok | mm | 175 | 175 | 175 | 175 |
| Skru spit (no gat step) | r/min | 0-244 | |||
| KLEMPING YUNIT | |||||
| Strong bilong pasim | kN | 1600 | |||
| Strok bilong opim mol | mm | 340 | |||
| Sais bilong plet | mm×mm | 960×680 | |||
| Rotari tebol diamita | mm | 800 | |||
| Namel long ol 'tie bar' (H×V) | mm×mm | 710×440 | |||
| Maks.delait | mm | 800 | |||
| Mold thickness(Min-Max) | mm | 160-460 | |||
| Ejekta strok | mm | 140 | |||
| Ejector tonnage | kN | 38×2 | |||
| Distens namel long ol senta bilong barel | mm | 420 | |||
| PAWA YUNIT | |||||
| Presa bilong haidrolik sistem | MPa | 17.5 | |||
| Pawa bilong mota bilong pam | kW | 18.7 | |||
| Pawa bilong hita | kW | 6.8 | |||
| Namba bilong ol temp kontrol zon | -- | 4×2 | |||
| OL NARAPELA | |||||
| Kapasiti bilong oil tenk | L | 330 | |||
| Sais bilong masin (L×W×H) | m×m×m | 5.2×1.76×2.1 | |||
| Hevi bilong masin | Ton | 7.1 | |||
YUNIT BILONG INJEKSEN
Injeksen yunit wantaim tupela seperet set bilong baret, injeksen long flai, tupela kala wantaim wanpela sut prodak, long daunim taim bilong saikel. Wanpela silinda bilong injeksen straksa, moa stret long injeksen.
Ful set sapota bilong injeksen yunit wantaim dabol stretpela linear gad, stretpela na hariap spit stata.
Injeksen yunit i ken i gat kain kain sais, na senisim wantaim kain kain dabol kala prodak.
Barel wantaim PID tempereja kontrol.
HAIDROLIK YUNIT
Ol haidrolik seket i save yusim ol nambawan bren valv na hos.
I gat DIN standet kon wantaim 'sealing ring joint', 'manifold' wantaim 'G thread 'sealing gland'. 'Self-sealing magnetic oilfilter em i gutpela long lukautim.
KONTROL SISTEM
I gat hai-pefomens KEBA kontrola, bikpela LCD displei na man-masin frenli intafeis. I gat tripela lait alam wantaim 'buzzer'.
Hot Tag: dabol kala injeksen molding masin, Saina dabol kala injeksen molding masin manifakta, saplaia, faktori
