OL SPESIFIKESEN
| PARAMETA | YUNIT | HMD130M8-IIP | |||
| intenesenel sais reiting | -- | 445/130 | |||
| YUNIT BILONG INJEKSEN | A | B | C | D | |
| Volium bilong sut (tingting) | cm3 | 193 | 215 | 263 | 316 |
| Hevi bilong sut (PS) | g | 176 | 196 | 239 | 287 |
| oz | 6.2 | 6.9 | 8.4 | 10.1 | |
| Mak bilong sut | g/s | 160 | 178 | 217 | 261 |
| Diamita bilong skru | mm | 36 | 38 | 42 | 46 |
| Presa bilong sut | MPa | 230 | 207 | 169 | 141 |
| Skru L/D resio | -- | 23.5:1 | 22:1 | 20:1 | 18:1 |
| Skru strok | mm | 190 | |||
| Skru spit (no gat step) | r/min | 0-300 | |||
| KLEMPING YUNIT | |||||
| Strong bilong pasim | kN | 1300 | |||
| Strok bilong opim mol | mm | 380 | |||
| Sais bilong plet | mm×mm | 630×610 | |||
| Namel long ol 'tie bar' (H×V) | mm×mm | 425×405 | |||
| Maks.delait | mm | 840 | |||
| Mold thickness(Min-Max) | mm | 150-460 | |||
| Ejekta strok | mm | 125 | |||
| Ejector tonnage | kN | 42 | |||
| PAWA YUNIT | |||||
| Presa bilong haidrolik sistem | MPa | 17.5 | |||
| Pawa bilong mota bilong pam | kW | 31.3 | |||
| Pawa bilong hita | kW | 11 | |||
| Namba bilong ol temp kontrol zon | -- | 4 | |||
| OL NARAPELA | |||||
| Kapasiti bilong oil tenk | L | 135 | |||
| Sais bilong masin (L×W×H) | m×m×m | 4.5×1.4×1.9 | |||
| Hevi bilong masin | Ton | 4 | |||
YUNIT BILONG INJEKSEN
Hai spit injeksen
Mekim gutpela 'hydraulic controlsystem', apim spit bilong injeksen tru na dispela i sotim taim bilong raun, moa yet long ol samting we i gat liklik '-wol.
Low frication design
Injeksen yunit i yusim 'linearguide', long daunim 'friction' na mekim spit i go antap long taim bilong injeksen.
Dabol injeksen silinda stik
Senisim 'bi-direction piston rod bilong injeksen silinda, mekim oilsil i stap longpela taim, injeksen i stap gut moa.
Skru&Barel
Standet wantaim ol infraret hiting ben, strongim strong bilong plastik.
KLEMPING YUNIT
Strongim platen
Ol plet we i kamap gutpela moa wantaim strongpela straksa, moa yet long ol prodak we i gat liklik wol.
Tai bar
I gat 'ally metallic tie bar' wantaim strong bilong mekim laipspan i go longpela.
HAIDROLIK YUNIT
Haidrolik sistem
Mekim 'hydraulic control system' i go antap, masin i wok hariap na wok gut moa, sotim taim bilong prodaksen. Standet wantaim 'clamping proportional valve', 'fast response' na 'precision control'.
Haidrolik motor
Hai-spid haidrolik mota.
ELEKTRIK YUNIT
Kontrola
Adapt Italy INOVA kompyuta, wantaim 10 ins kala LED skrin, luksave long stretpela na hariap riaksen.
Elektrik element
Kontrakta na limitet swit i senisim Omron na Schneider.
Hot Tag: medikel plastik molding, Saina medikol plastik molding manifakta, saplaia, faktori
