Senta strongpela plet disain, i gutpela long ol mol we i nidim bikpela senta strong olsem ol baket bilong penim. Klem yunit i stap gut na hariap, wantaim gutpela strong na longpela laiptaim bilong tai bar.
Spesel disain skru i save mekim wok bilong wokim plastik na sasim i kamap gutpela moa, na i sotim taim bilong wokim samting. Hai-spid 'charging motor' i save mekim 'charging' spit i go antap.
Adoptim dabol inkris servo motor sistem, standet wantaim ejek long flai, long kamapim gutpela prodaksen efisiens. (Ekssept HMD430M8-SII)
Distributor bilong wara bilong mekim kol i gat 15+1φ12 kwik plag. Yusim infraret hiting ben, gutpela hat presevesen ifek, 30% eneji seving winim nomol hiting ben.
Ol rot bilong stretim pen baket
| PARAMETA | YUNIT | HMD430M8-SII | HMD500M8-SII |
| intanesenel sais reiting | -- | 2859/430 | 3165/500 |
| YUNIT BILONG INJEKSEN | |||
| Volium bilong sut (tingting) | cm3 | 1809 | 2042 |
| Hevi bilong sut (PS) | g | 1646 | 1858 |
| oz | 58.1 | 65.6 | |
| Mak bilong sut | g/s | 591 | 680 |
| Diamita bilong skru | mm | 80 | 85 |
| Presa bilong sut | MPa | 158 | 155 |
| Skru L/D resio | -- | 22.5:1 | 22.7:1 |
| Skru strok | mm | 360 | |
| Skru spit (no gat step) | r/min | 0-173 | 0-165 |
| KLEMPING YUNIT | |||
| Strong bilong pasim | kN | 4300 | 5000 |
| Strok bilong opim mol | mm | 730 | 810 |
| Sais bilong plet | mm×mm | 1032×1042 | 1128×1168 |
| Namel long ol tai bar (H×V) | mm×mm | 760×730 | 830×830 |
| Maks.delait | mm | 1460 | 1630 |
| Mold thickness(Min-Max) | mm | 250-730 | 300-820 |
| Ejekta strok | mm | 185 | 210 |
| Ejector tonnage | kN | 111 | 111 |
| PAWA YUNIT | |||
| Presa bilong haidrolik sistem | MPa | 17.5 | 17.5 |
| Pawa bilong mota bilong pam | kW | 72 | 48+31 |
| Pawa bilong hita | kW | 47.8 | 51.6 |
| Namba bilong ol temp kontrol zon | -- | 6 | 6 |
| OL NARAPELA | |||
| Kapasiti bilong oil tenk | L | 500 | 590 |
| Sais bilong masin (L×W×H) | m×m×m | 8.0×2.0×2.6 | 8.3×2.1×2.6 |
| Hevi bilong masin | Ton | 18 | 22 |
Hot Tag: baket injeksen molding masin, Saina baket injeksen molding masin manifakta, saplaia, faktori
